To order parts and accessories CLICK HERE
Calibration Stations also available CLICK HERE
Description
OSHA defines the breathing zone as a ten inch radius around the
worker’s nose and mouth, and requires that worker exposure monitoring
air samples be collected in the breathing zone. Air sampling filters
may be attached to the collar or lapel. Traditionally this means only a
single gas monitor would be small enough for a worker to practically
wear a gas monitor ‘In the breathing zone’. Now there is a 4 gas
monitor smaller than many single gas monitors.
The GX-3R is the worlds smallest 4 gas monitor weighing only 3.52
ounces and can comfortably be clipped within a worker’s breathing
zone (2.2” W x 2.55” H x 1.02” D). It simultaneously monitors and
displays LEL combustibles, O2, CO (Hydrogen compensated CO also
available), and H2S.
The GX-3R represents the latest evolution of gas detection technology
utilizing a new generation of micro sensors. The LEL sensor has a
unique design with two active filaments in one sensor to increase it’s
resistance to silicone poisoning. If one filament gets poisoned the
second filament takes over. The new O2 sensor is electrochemical with
a 5 year life span. H2S and CO are now available in a combo micro
sensor.
Safety supervisors will appreciate the non-compliance indicator. The
instrument flashes it’s 3 LED lights every 30 seconds in the following
conditions; if the instrument has not been bump tested, or if calibration
is due, or if there was a gas alarm event. The 3 LED lights will continue
to flash once every 30 seconds until the non-compliance condition has
been resolved. The 30 second interval is adjustable.
Applications
Personal monitoring
Confined spaces
Refineries/petrochemical
Utilities
• Oil and Gas
• Water/wastewater
• Fire services
• Construction
To order parts and accessories CLICK HERE
Calibration Stations also available CLICK HERE